Author Topic: Pinball Test Fixture (test benches)  (Read 10075 times)

0 Members and 1 Guest are viewing this topic.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Pinball Test Fixture (test benches)
« on: July 09, 2013, 07:27:51 PM »
Hi guys here are some photos of my pinball test fixtures sadly I dot have to room to keep them all setup permanently but maybe one day.

   The Williams bench is fully working
The bally solonoid tester is fully working
The bally lamp tester is fully working
The bally display tester is fully working
But sadly the MPU tester still needs some love but ill get it sorted one day.

Here's a group shot

And this is a WPC test bench I've been building its getting very close to being finished

Offline andtan

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Canberra, ACT
Re: Pinball Test Fixture (test benches)
« Reply #1 on: July 09, 2013, 07:35:00 PM »
Oh how I would love a WPC test bench.... $%$

Offline ktm450

  • Trade Count: (+1)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong, Victoria
Re: Pinball Test Fixture (test benches)
« Reply #2 on: July 09, 2013, 07:46:11 PM »
Very nice mate  ^^^

Offline Blktgr74

  • Trade Count: (0)
  • ****
  • Forum Posts:
Re: Pinball Test Fixture (test benches)
« Reply #3 on: July 09, 2013, 08:01:54 PM »
Awesome. One day I might have the skill and knowledge to build and use a test bench.

Offline studley67

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • adelaide hills
    • facebook
Re: Pinball Test Fixture (test benches)
« Reply #4 on: July 09, 2013, 08:23:25 PM »
great stuff mate,glad i could contribute. $#$ are you planning on taking up diagnostic work?
Life is too short to spend time with people who suck the happiness out of you

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Pinball Test Fixture (test benches)
« Reply #5 on: July 09, 2013, 09:55:57 PM »

Well done mate ! It took me YEARS to track down a Bally Set, and I use it often. I still need the Lamp Driver test fixture  @@^

If you ever decide to sell any of these babies -  #@#
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia

Offline andtan

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Canberra, ACT
Re: Pinball Test Fixture (test benches)
« Reply #6 on: July 09, 2013, 10:32:01 PM »
Pardon my ignorance, but was a Test Bench, such as the WPC one, something that was able to be constructed using spare boards etc., or were they a specific piece of hardware?

I have a few spare boards, and would be interested to building one if that was at all possible.

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Pinball Test Fixture (test benches)
« Reply #7 on: July 09, 2013, 10:38:24 PM »
Pardon my ignorance, but was a Test Bench, such as the WPC one, something that was able to be constructed using spare boards etc., or were they a specific piece of hardware?

I have a few spare boards, and would be interested to building one if that was at all possible.

 Mine I've built using just standard wpc boards and wiring them up to work on the bench.  You basically need a while pinball machine and cut out the in needed bits ;)

  I almost have enough boards to build a data east test bench aswell

Offline andtan

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Canberra, ACT
Re: Pinball Test Fixture (test benches)
« Reply #8 on: July 09, 2013, 10:48:09 PM »
Hmmm, that sounds promising.

I'd be interested to get some pointers off you on how you built your WPC bench. I can feel another project coming on #@#

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Pinball Test Fixture (test benches)
« Reply #9 on: July 09, 2013, 10:49:45 PM »
Hmmm, that sounds promising.

I'd be interested to get some pointers off you on how you built your WPC bench. I can feel another project coming on #@#

No worries when ever your ready let me know.  I still have a few issues to sort out before it fully ready

Offline ddstoys

  • Trade Count: (+23)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Geelong
Re: Pinball Test Fixture (test benches)
« Reply #10 on: July 28, 2013, 01:16:13 AM »
I'm still yet to set it up but have a PC thanks to freiherr. Have the test unit a massive box of cables for each board type and the original Manual.    I have the original PC at the moment I'm hoping I can clone the hard drive and get the new PC to boot with all the needed files.

Offline 4_amusement_only

  • Trade Count: (0)
  • ******
  • Forum Posts:
Re: Pinball Test Fixture (test benches)
« Reply #11 on: July 28, 2013, 01:53:07 AM »
Wow, where did you score that from?

Offline vinito

  • Trade Count: (0)
  • *****
  • Forum Posts:
  • Kansas City, KS USA
Re: Pinball Test Fixture (test benches)
« Reply #12 on: July 28, 2013, 02:05:03 AM »
Hehe.
I can't help but think that there's probably a smart phone "Pinball Tricorder" app coming someday where you just wave the little thing around the machine and it troubleshoots the game, prints instructions and orders the parts for you.
Maybe CFH will write it - and eventually tear it down?

But those fixtures of yours are very cool nonetheless.
I feel more like I do now than I did when I first got here.

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: Pinball Test Fixture (test benches)
« Reply #13 on: July 28, 2013, 11:46:38 AM »
Hmmm, that sounds promising.

I'd be interested to get some pointers off you on how you built your WPC bench. I can feel another project coming on #@#
I built mine so it can test both wpc soundboards.
I have also made some adapter cables so i can test wpc-95 cpu , AV and power driver boards.
so if you need any advice feel free to ask

I then have another bench with a whole heap of adapters so i can do WMS sys 3 to 7, 11, data east and sega.
and early bally and gtb are done on another bench.
I am strapped for room also so a bench for each just aint going to happen
 
« Last Edit: July 28, 2013, 11:52:17 AM by beaky »
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline johnwartjr

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Columbus, Indiana USA
  • It's ALIVEEEEEE!
    • My Home Gameroom . com
Re: Pinball Test Fixture (test benches)
« Reply #14 on: March 10, 2014, 12:45:31 PM »
Hmmm, that sounds promising.

I'd be interested to get some pointers off you on how you built your WPC bench. I can feel another project coming on #@#
I built mine so it can test both wpc soundboards.
I have also made some adapter cables so i can test wpc-95 cpu , AV and power driver boards.
so if you need any advice feel free to ask

I then have another bench with a whole heap of adapters so i can do WMS sys 3 to 7, 11, data east and sega.
and early bally and gtb are done on another bench.
I am strapped for room also so a bench for each just aint going to happen
 

I just bought a WPC-89 test rig. Been looking for one for nearly 10 years and lucked into one.

How do you test both DCS and WPC-89 sound?

Do you have both xformers installed inside the rig, or are you just using the DCS one and underdriving the 18 volts on the WPC-89 sound board?