Hi all,
A friend of mine gave me an idea the other week that was actually staring me in the face the whole time.
There is an area on WH20 just under where the ball enters the playfield from the plunger lane that is bare , but the biggest issue is that it has a globe in it that nearly takes out your right retina when playing a game.
Dilemma = Take the bulb out and it is too dark there - leave it in , lose your eye
So my mate says - why not design a custom plastic for that area.
So I have started one today...
This is the area I am talking about ( I have a warm white LED in this image to try and soften it a bit )
And this is the plastic I have drawn so far....
My idea is to cut 2 slots in the plastic that the wireform supports for the plunger wireform can 'slip through' and then use 2 x plastic posts of some type , cut to length under the slot holes and long screws to hold this in place utilising the EXISTING screw hols in the game - WH20 owners will know, or at least be able to make out what I mean.
Any WH20 owners agree with this idea / dislike this idea / want this plastic created - please make comments....