Author Topic: Iron Man - various pinball mods.  (Read 35579 times)

0 Members and 2 Guests are viewing this topic.

Offline Pop Bumper Pete

  • Trade Count: (+4)
  • ******
  • Forum Posts:
  • Ballarat
Re: Ironman pinball mods.
« Reply #60 on: January 23, 2012, 06:11:55 PM »
I have not seen any LED flickering or ghosting on Ironman or Batman, but both of those games also use LEDs in the pop bumpers

Spiderman has bad flickering as the lamps are supposed ot be at different brightness levels, rather than on/or/off

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Ironman pinball mods.
« Reply #61 on: January 23, 2012, 08:20:12 PM »
my Iron Man has full LED kit and no flickering at all unlike my creature which has some ghosting as only part of the playfield has led's but not the ablaze 3's. IM looks awesome with LEDs - with the Ablaze 3 and 9's used which are designed for flashing and GI lighting.

http://www.pinballlife.com/index.php?p=catalog&parent=192&pg=1

Though in my pop bumpers were the ablaze 1's and they don't work at all and then replace it with a ablaze 3 and it works.
« Last Edit: January 23, 2012, 08:25:08 PM by swinks »
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline beaky

  • Trade Count: (+7)
  • ******
  • Forum Posts:
  • Melbourne, Vic
Re: Ironman pinball mods.
« Reply #62 on: January 24, 2012, 03:47:54 AM »
the under side of a stern playfield is very similar to a sega pin.
these rails will make working on some parts of the underside of the playfield easier (such as flipper adjustments and servicing)
On site pinball repairs in MELBOURNE NTH SUBURBS  : Circuit board repairs and refurbishing Australia wide (via Aust post)

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Ironman pinball mods.
« Reply #63 on: January 24, 2012, 09:25:38 PM »
Ok guys, I have designed up 10 cards, only a beginner at this so be kind.

The concept of printing the files down at the photoshop on as a 6" x 4" had a few glitches going from a Illustrator file to jpeg but got it sorted in the end. It looks great, a nice professional finish and no need to laminate.

Ok, voting time as 5 sets of cards are going to be uploaded for your votes, as I will print off 2 copies (1 spare in case you stuff up the trimming  ^&^ ) of your five favourites (as you may try a card or two that aren't what you were hoping for) and I will mail them to you FREE (and let you trim them down if you don't mind). The card numbers are odd at the top and even on the bottom and you can mix up, it doesn't have to be 2 cards off the one sheet.

Offer is for Iron Man owners and those guys that have it on there hit list for 2012 - though I will contact Inkochnito to see if he wants copies on his website.

https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Ironman pinball mods.
« Reply #64 on: January 24, 2012, 09:26:42 PM »
and card number 9 & 10
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Cow Corner

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: Ironman pinball mods.
« Reply #65 on: January 24, 2012, 09:47:05 PM »
Excellent work Jady, I like sets 3,4 and 5,6
Well done mate!
" It's not the right time to be sober, now the idiots are taking over"

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Ironman pinball mods.
« Reply #66 on: February 03, 2012, 09:26:21 PM »
please see below for mods that I could find for the Iron Man. I collected this data as I want to set up a IM Fan web page with info of mods you can purchase and DIY mods. I was fortunate to have 80% of these mods when I bought this machine.

Hope the info helps.

The following sites are places known for various non-standard parts that can be purchased from along with costs as a quick guide. And if you discover more places please send me a message and I can add them to the list or make changes if availability changes.

BACKBOX
Full Backglass LED lighting Kit = $140 - $190 USD
http://www.flipperfidelity.com/products.php?cat=Animated%20LED%20Backbox%20Light%20Replacement%20Panels&itemId=44
or
http://shop.cointaker.com/category.sc?categoryId=76

Chest Arc Reactor Flasher Kit = $25 USD
http://www.pinballlife.com/index.php?p=product&id=2437&parent=0

Red Coloured Lens = $16 USD
http://www.pinbits.com/index.php?main_page=product_info&cPath=13_48&products_id=451

4. Gold / Black Edge Moulding = $13 USD
http://www.t-molding.com/store/home.php?cat=12




PLAYFIELD / CABINET
5. Mirror Blades = $125 USD a set
http://www.pinballdecals.com/MirrorBladesPage.html

Full LED lighting Kit = $76 USD
http://shop.cointaker.com/product.sc;jsessionid=1618340DCD692C0ECE66ACB90262F602.qscstrfrnt04?productId=426&categoryId=76

Brass Plated Flipper Bats = $14 USD a set
http://www.pinballlife.com/index.php?p=product&id=2229&parent=0

Gold Plated Flipper Buttons = $10 USD a set
http://www.pinballlife.com/index.php?p=product&id=2227&parent=234

Custom Target Decal Kit = $35 USD a set
http://www.pinballdecals.com/IMTargetDecalsPage.html

Cliffy RHS Ramp Protector = $20 AUS
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

11. Stealth Magnet Wear Protectors = $5 USD a set
http://pinballpal.com/stealth/

12. Candy Red Trim, Hinges and Legs = $250 USD a set (though you need to provide all the gear to be coated)
http://www.backalleycreations.com/bac%20ironman%20pinball%20addons.html

13. Leg / Cabinet Protectors (Yellow) = $28 AUS a set
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

14. Brass Plated Leg Bolts = $10 USD for a set
http://www.pinballlife.com/index.php?p=product&id=2116&parent=7

15. Brass Plated Leg Levellers = $8 USD for a set
http://www.pinballlife.com/index.php?p=product&id=667&parent=7

16. Brass Plated Coin Door = $400 USD
http://www.pinballdecals.com/STERNBrassDoorPage.html

17. Brass Plunger Assembly = $125 USD
http://www.pinballdecals.com/ShooterRodsPage.html

17. Custom Cast Iron Man Head Plunger Rod = $85 USD
http://www.pinballdecals.com/ShooterRodsPage.html

19. Sub Woofer Kit = $85, $90 USD
http://www.flippersound.com
or
http://www.decoratorsupply.com/pinball/Products/Speaker_Products/Find_Your_Game/Iron_Man/iron_man.htm

20. Delux Speaker Kit = $135 USD
http://www.flippersound.com/

21. Shaker Motor Kit = $195USD, $250 AUS
http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MC-502-5027-00-01&Category_Code=MOT&Product_Count=1
or
http://www.pinballspareparts.com.au/index.php?crn=225&rn=2750&action=show_detail

22. Under Cabinet Lighting Kit = $149 USD
http://shop.cointaker.com/product.sc?productId=1037&categoryId=76

NOTE: THESE COSTS ARE BASED AT THE TIME OF RESEARCH OR WHEN NOTIFIED OF ANY CHANGES. COSTS DO NOT INCLUDE FREIGHT AS THIS IS A VARIABLE. PLEASE LET ME KNOW IF THERE ARE OTHER PLACES TO GET PARTS THAT ARE COMPETITIVE PRICED. ALSO PLEASE LET ME KNOW IF THERE ARE ANY OTHER CUSTOM PARTS THAT ARE NOT CAPTURED HERE.
« Last Edit: February 03, 2012, 09:31:30 PM by swinks »
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Ironman pinball mods.
« Reply #67 on: February 12, 2012, 08:25:55 PM »
Here is a mod that I did a little bit of work on today,

1. bought a spare Iron Monger from RTBB for $22, so at least I have one good unit to go back in if needed or if I stuff up this mod

2. drilled a 2 mm pivot drill right through the centre (arc reactor) of his chest from the front to the back

3. then opened up right through with about a 8mm drill (first the whole arc reactor section and including the next outer ring because I did make a little mistake) all depends how much you want the globe to stick out really - so start small and go to suit your personal liking of the globe.

4. then drill the back out to 13mm roughly half way through to allow clearance for the globe holder fitting (Note: take care as the drill wants to pull through to the front and possible out the front of the iron monger wrecking the look so be careful).

5. then the light fitting, I buggered up the first light fitting in modifying so persisted with the mod with a crappy old bulb holder (which will be replaced soon). Screwed the light bracket to his arse to keep the globe forward to the chest hole. Used a blue frosted led into a extended globe holder with 2 temp wires connected to a 6 volt battery pack just to test for the photo and to check that it looks ok.

6. next minor challenge is to work out how the original monger unit comes out

7. and then lastly connect the new wires to a close GI lighting - which I will update once I work it out how with some photos.

What do you reckon DAZ?

photo 1 - front of iron monger with globe
photo 2 - back of iron monger with globe fitting
photo 3 - iron monger lit up via a battery pack
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Cow Corner

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: Ironman pinball mods.
« Reply #68 on: February 12, 2012, 08:47:30 PM »
 ^^^ top job Jady, looks fantastic mate!!
" It's not the right time to be sober, now the idiots are taking over"

Offline Hooked

  • Trade Count: (0)
  • **
  • High Score Initials:
  • Forum Posts:
  • USA
  • God-Family- Pins.
Re: Iron Man - various pinball mods.
« Reply #69 on: August 18, 2012, 01:28:49 AM »
Long time no post but I do make three figure kits for $295 US$ shipped to AU (most cases).
Can also do singles of War Machine $110 and Whiplash $135.

Here is a vid.



All hook up using clips so no solder needed.
Mine use the GI for the chest led and the whiplash hooks to your flasher.

Thanks for looking.
There are three types of whips to choose from.
e-mail me robertcampbell2@hotmail.com
Custom mods made from top quality materals.
http://Http://Hookedonpinball.com

Offline Cow Corner

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: Iron Man - various pinball mods.
« Reply #70 on: August 18, 2012, 11:45:53 PM »
Long time no post but I do make three figure kits for $295 US$ shipped to AU (most cases).
Can also do singles of War Machine $110 and Whiplash $135.

Here is a vid.



All hook up using clips so no solder needed.
Mine use the GI for the chest led and the whiplash hooks to your flasher.

Thanks for looking.
There are three types of whips to choose from.
e-mail me robertcampbell2@hotmail.com

This is a must have for IM.
I just got my 3 figure set delivered on Friday and will install them very soon.
Robert is great guy to deal with, fast postage, excellent communication and helpful advice.
Thanks again mate, the figures look brilliant!
" It's not the right time to be sober, now the idiots are taking over"

Offline Hooked

  • Trade Count: (0)
  • **
  • High Score Initials:
  • Forum Posts:
  • USA
  • God-Family- Pins.
Re: Iron Man - various pinball mods.
« Reply #71 on: August 19, 2012, 10:07:04 AM »
Why thank you my down under pinball brother  ^^^

Looks like most of AU is going to fall to the $295 side have quoted three and all would be the $295 version.
Remember you have your choice of three different whips.  White -yellow - yellow casted all EL and tie to the flasher.
Custom mods made from top quality materals.
http://Http://Hookedonpinball.com

Offline Cow Corner

  • Trade Count: (0)
  • ******
  • Forum Posts:
  • Brisbane
Re: Ironman pinball mods.
« Reply #72 on: September 22, 2012, 08:17:58 PM »
please see below for mods that I could find for the Iron Man. I collected this data as I want to set up a IM Fan web page with info of mods you can purchase and DIY mods. I was fortunate to have 80% of these mods when I bought this machine.

Hope the info helps.

The following sites are places known for various non-standard parts that can be purchased from along with costs as a quick guide. And if you discover more places please send me a message and I can add them to the list or make changes if availability changes.

BACKBOX
Full Backglass LED lighting Kit = $140 - $190 USD
http://www.flipperfidelity.com/products.php?cat=Animated%20LED%20Backbox%20Light%20Replacement%20Panels&itemId=44
or
http://shop.cointaker.com/category.sc?categoryId=76

Chest Arc Reactor Flasher Kit = $25 USD
http://www.pinballlife.com/index.php?p=product&id=2437&parent=0

Red Coloured Lens = $16 USD
http://www.pinbits.com/index.php?main_page=product_info&cPath=13_48&products_id=451

4. Gold / Black Edge Moulding = $13 USD
http://www.t-molding.com/store/home.php?cat=12




PLAYFIELD / CABINET
5. Mirror Blades = $125 USD a set
http://www.pinballdecals.com/MirrorBladesPage.html

Full LED lighting Kit = $76 USD
http://shop.cointaker.com/product.sc;jsessionid=1618340DCD692C0ECE66ACB90262F602.qscstrfrnt04?productId=426&categoryId=76

Brass Plated Flipper Bats = $14 USD a set
http://www.pinballlife.com/index.php?p=product&id=2229&parent=0

Gold Plated Flipper Buttons = $10 USD a set
http://www.pinballlife.com/index.php?p=product&id=2227&parent=234

Custom Target Decal Kit = $35 USD a set
http://www.pinballdecals.com/IMTargetDecalsPage.html

Cliffy RHS Ramp Protector = $20 AUS
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

11. Stealth Magnet Wear Protectors = $5 USD a set
http://pinballpal.com/stealth/

12. Candy Red Trim, Hinges and Legs = $250 USD a set (though you need to provide all the gear to be coated)
http://www.backalleycreations.com/bac%20ironman%20pinball%20addons.html

13. Leg / Cabinet Protectors (Yellow) = $28 AUS a set
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

14. Brass Plated Leg Bolts = $10 USD for a set
http://www.pinballlife.com/index.php?p=product&id=2116&parent=7

15. Brass Plated Leg Levellers = $8 USD for a set
http://www.pinballlife.com/index.php?p=product&id=667&parent=7

16. Brass Plated Coin Door = $400 USD
http://www.pinballdecals.com/STERNBrassDoorPage.html

17. Brass Plunger Assembly = $125 USD
http://www.pinballdecals.com/ShooterRodsPage.html

17. Custom Cast Iron Man Head Plunger Rod = $85 USD
http://www.pinballdecals.com/ShooterRodsPage.html

19. Sub Woofer Kit = $85, $90 USD
http://www.flippersound.com
or
http://www.decoratorsupply.com/pinball/Products/Speaker_Products/Find_Your_Game/Iron_Man/iron_man.htm

20. Delux Speaker Kit = $135 USD
http://www.flippersound.com/

21. Shaker Motor Kit = $195USD, $250 AUS
http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MC-502-5027-00-01&Category_Code=MOT&Product_Count=1
or
http://www.pinballspareparts.com.au/index.php?crn=225&rn=2750&action=show_detail

22. Under Cabinet Lighting Kit = $149 USD
http://shop.cointaker.com/product.sc?productId=1037&categoryId=76

NOTE: THESE COSTS ARE BASED AT THE TIME OF RESEARCH OR WHEN NOTIFIED OF ANY CHANGES. COSTS DO NOT INCLUDE FREIGHT AS THIS IS A VARIABLE. PLEASE LET ME KNOW IF THERE ARE OTHER PLACES TO GET PARTS THAT ARE COMPETITIVE PRICED. ALSO PLEASE LET ME KNOW IF THERE ARE ANY OTHER CUSTOM PARTS THAT ARE NOT CAPTURED HERE.

I ordered the stealth protectors from pinball pal for the magnets over 3 months ago and as yet they still have not arrived.
I have sent a few emails to enquire on my order and as yet I am still to get a single response from them.
It was only a small amount of money spent but I fear that it is gone, approach this mob with caution!!!
" It's not the right time to be sober, now the idiots are taking over"

Offline swinks

  • Trade Count: (+18)
  • ******
  • High Score Initials:
  • Forum Posts:
  • Lake Macquarie, NSW
Re: Iron Man - various pinball mods.
« Reply #73 on: September 22, 2012, 09:35:31 PM »
I have heard that the guy from pinball pal is pretty sick and his business has come to a halt due to his bad health, must be a one man show.
https://swinks.com.au

for pinball parts (reproduction & mods)
for pinball t-shirts

Offline Strangeways

  • Pinball Restoration is my passion
  • Administrator
  • Trade Count: (+9)
  • *****
  • High Score Initials:
  • Forum Posts:
  • Melbourne
  • ABN 68 283 634 461
    • Ride The Boney Beast
Re: Ironman pinball mods.
« Reply #74 on: September 23, 2012, 12:57:13 PM »
please see below for mods that I could find for the Iron Man. I collected this data as I want to set up a IM Fan web page with info of mods you can purchase and DIY mods. I was fortunate to have 80% of these mods when I bought this machine.

Hope the info helps.

The following sites are places known for various non-standard parts that can be purchased from along with costs as a quick guide. And if you discover more places please send me a message and I can add them to the list or make changes if availability changes.

BACKBOX
Full Backglass LED lighting Kit = $140 - $190 USD
http://www.flipperfidelity.com/products.php?cat=Animated%20LED%20Backbox%20Light%20Replacement%20Panels&itemId=44
or
http://shop.cointaker.com/category.sc?categoryId=76

Chest Arc Reactor Flasher Kit = $25 USD
http://www.pinballlife.com/index.php?p=product&id=2437&parent=0

Red Coloured Lens = $16 USD
http://www.pinbits.com/index.php?main_page=product_info&cPath=13_48&products_id=451

4. Gold / Black Edge Moulding = $13 USD
http://www.t-molding.com/store/home.php?cat=12




PLAYFIELD / CABINET
5. Mirror Blades = $125 USD a set
http://www.pinballdecals.com/MirrorBladesPage.html

Full LED lighting Kit = $76 USD
http://shop.cointaker.com/product.sc;jsessionid=1618340DCD692C0ECE66ACB90262F602.qscstrfrnt04?productId=426&categoryId=76

Brass Plated Flipper Bats = $14 USD a set
http://www.pinballlife.com/index.php?p=product&id=2229&parent=0

Gold Plated Flipper Buttons = $10 USD a set
http://www.pinballlife.com/index.php?p=product&id=2227&parent=234

Custom Target Decal Kit = $35 USD a set
http://www.pinballdecals.com/IMTargetDecalsPage.html

Cliffy RHS Ramp Protector = $20 AUS
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

11. Stealth Magnet Wear Protectors = $5 USD a set
http://pinballpal.com/stealth/

12. Candy Red Trim, Hinges and Legs = $250 USD a set (though you need to provide all the gear to be coated)
http://www.backalleycreations.com/bac%20ironman%20pinball%20addons.html

13. Leg / Cabinet Protectors (Yellow) = $28 AUS a set
http://www.rtbb.com.au/catalog/product_info.php?products_id=2300

14. Brass Plated Leg Bolts = $10 USD for a set
http://www.pinballlife.com/index.php?p=product&id=2116&parent=7

15. Brass Plated Leg Levellers = $8 USD for a set
http://www.pinballlife.com/index.php?p=product&id=667&parent=7

16. Brass Plated Coin Door = $400 USD
http://www.pinballdecals.com/STERNBrassDoorPage.html

17. Brass Plunger Assembly = $125 USD
http://www.pinballdecals.com/ShooterRodsPage.html

17. Custom Cast Iron Man Head Plunger Rod = $85 USD
http://www.pinballdecals.com/ShooterRodsPage.html

19. Sub Woofer Kit = $85, $90 USD
http://www.flippersound.com
or
http://www.decoratorsupply.com/pinball/Products/Speaker_Products/Find_Your_Game/Iron_Man/iron_man.htm

20. Delux Speaker Kit = $135 USD
http://www.flippersound.com/

21. Shaker Motor Kit = $195USD, $250 AUS
http://bayareaamusements.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MC-502-5027-00-01&Category_Code=MOT&Product_Count=1
or
http://www.pinballspareparts.com.au/index.php?crn=225&rn=2750&action=show_detail

22. Under Cabinet Lighting Kit = $149 USD
http://shop.cointaker.com/product.sc?productId=1037&categoryId=76

NOTE: THESE COSTS ARE BASED AT THE TIME OF RESEARCH OR WHEN NOTIFIED OF ANY CHANGES. COSTS DO NOT INCLUDE FREIGHT AS THIS IS A VARIABLE. PLEASE LET ME KNOW IF THERE ARE OTHER PLACES TO GET PARTS THAT ARE COMPETITIVE PRICED. ALSO PLEASE LET ME KNOW IF THERE ARE ANY OTHER CUSTOM PARTS THAT ARE NOT CAPTURED HERE.

I ordered the stealth protectors from pinball pal for the magnets over 3 months ago and as yet they still have not arrived.
I have sent a few emails to enquire on my order and as yet I am still to get a single response from them.
It was only a small amount of money spent but I fear that it is gone, approach this mob with caution!!!


Mark Clayton is the owner of PinballPa,l and he had health issues sometime last year. I'm not sure who runs the site now, but I know you cannot place orders. You might want to email and ask for a refund. It would have been a good idea for the site Admin to post a message on the website so people don't place orders.
Aussie Pinball - Proud to be Australia's Premier Pinball Forum

http://www.australianpinballrestorations.com.au/

http://www.rtbb.com.au/catalog/

We carry the largest range of NEW Ramps in Australia