Author Topic: Hankin Pinball Schematic  (Read 5074 times)

0 Members and 7 Guests are viewing this topic.

Offline BigTrev

  • Trade Count: (0)
  • **
  • Forum Posts:
  • Currabubula NSW
Re:
« on: June 20, 2015, 06:38:03 PM »
Hi Toads. No it plays for a while and then stops. It only goes to 4 beeps on startup until I replace the fuse again. It's the 3A solenoid fuse. There must be something overloading it somewhere? I had a problem with the 5 bank drop target so I replaced the coil and plunger and it worked better?
I have a few non original coils I might check?
WTB:  Hankin Orbit1 and FJ project machines.
It doesn't hurt to ask..