Klondike-no lights

[cs1dino]

My Klondike turns on and plays but not one light works, can anyone help me figure this out?

[oldpins]

On the playfield or in the light box (Back box) or both?

[cs1dino]

The playing field

[Homepin]

Welcome to AP

[cs1dino]

Thank you

[oldpins]

First to check will be your playfield fuse. With the machine off at the wall, remove the fuse and inspect.

[The pinballist formally known as Dean Morgan]

Good machine Klondike if your in Melbourne and ever want to sell it or swap for a Williams Laser Cue let me know

[cs1dino]

First to check will be your playfield fuse. With the machine off at the wall, remove the fuse and inspect.

Fuses are all good

[Retropin]

Pretty sure the playfield lights on a WILLIAMS are fed through the 'HOLD" relay... one side does the back box... another the playfield

[The pinballist formally known as Dean Morgan]

Tilt relay

[Retropin]

Tilt relay

I was close..LOL

[ralph67]

Check the "lock relay" and check the connectors on lower panel they may be corroded

[oldpins]

+1 on the lock relay, also check the 'Bounce' switch or the 'Kick' switch as known on a Williams machine!

[cs1dino]

Thank you all for your assistance. It was the lock relay, a wire was barely connected.

[ralph67]

Thank you all for your assistance. It was the lock relay, a wire was barely connected.

Sweet