Progress has stopped until I get the shiney bits back from the platers sadly. The rifle holster hangs out the bottom and cant be installed or test fitted till the legs arrive :(.
It was made from Moulded Masonite but from years of having a gun installed and removed it was pretty hammered. I've got it back into shape as best I could installed a steel sleeve inside where the barrel sits to help prevent more damage and coated the outside with a layer of fibreglass. Once I get the legs I'll check it for final fit and if it's all good it's will be primed sanded and painted
![](http://uploads.tapatalk-cdn.com/20160412/c2433e30356d40fa88ecdcf19d8242a3.jpg)
I'm determined not to start the target unit until the gun stand is completely back together far too many pieces to get mixed up if I do both at once in the small space I have to work. Been helping a guy in the USA with measurements and photos so I in buried the main section here it's is
![](http://uploads.tapatalk-cdn.com/20160412/5eff225f4d3cff6634c7a2bdf614453c.jpg)
Sent from my iPhone using Tapatalk