Ok Xmas festivities are over and parts have arrived managed to get a fair bit done this weekend bookcase has been rebuilt as base was cracked and short and long crank arm replaced also discovered that the wrong plunger had been installed on one off the slingshot assemblies which was limiting the stroke .
Pop bumper lighting has been reinstalled soldered and stapled with new clear insulation were required ready for the coil mechs .
Flipper mechs have had threadlocker placed on the threads and have been installed on the playfield it felt good to see the flippers reinstalled .
All coils have been rewrapped makes a huge difference .
Ramp diverter plunger was replaced as a key ring had been installed as the spring had broken at some stage .
A common fault on the Addams seems to be the welding on some of the stainless fails and this one was no different, both the swamp and chair needed rewelding a ferw more tacks will ensure that it doesnt fail again.
A few pictures will show it better.
Cheers
John
