Another update it took a while but the wiring loom is now installed on the new playfield and all that is left to do is complete the topside.
During the week my rivet die set arrived from the USA as well as a Cliffy set to prevent any future wear .
My intention was to buy a 1 Tonne arbor press but stock wont be available in Sydney until the end of March so i thought i would try my drill press which surprisingly did the job well.
So all the riveting on the new plastic set has been completed i need to decide on what LEDS to install before i can finish off the topside of the playfield.
Also installed a fuse for each magnet hopefully to prevent magnet burn.
