williams Lazercue resto/build

[Retropin]

Ha Ha!! Looks like the sort of pile you need a 3mm Allen Key for

[studley67]

Ha Ha!! Looks like the sort of pile you need a 3mm Allen Key for

took ot my 3mm Allen Key today.and started wiring up the old girl.pics

[studley67]

more wiring +continuous lacing with wax lacing cord.photos+

[studley67]

I hope to have the looms attached to the playfield tommorow,then i have to re-attach the target bank(solder more wires) and make a custom lamp strips 5 lamps x 2 to fit to playfield.these were mising.I am still awaiting the new displays and power board.hopefully they will arive by the end of the week.

[ddstoys]

Wow your fingers and eyes must be stuffed after joining soldering and heat shrinking all those wires.    How are you working out what wire goes where???  It's just mind boggling  well done

[studley67]

Wow your fingers and eyes must be stuffed after joining soldering and heat shrinking all those wires.    How are you working out what wire goes where???  It's just mind boggling  well done

years of experience,i am a wireperson by trade.At least i have made a start.

[pinnies4me]

I hope to have the looms attached to the playfield tommorow,then i have to re-attach the target bank(solder more wires) and make a custom lamp strips 5 lamps x 2 to fit to playfield.these were mising.I am still awaiting the new displays and power board.hopefully they will arive by the end of the week.

Hey Studley, don't know if these are any use to you? Bit of surface rust, might save some effort though? Happy to send over - if you're interested, post the lamp to lamp centre distance and overall length and I'll see if they are a match.

[studley67]

WOW,they look right,i'll measure,lamp to lamp is about 32mm overall is 160mm.i was going to hack my phoenix playfield it has 2 strips of 10. .i hope

[pinnies4me]

Bummer! These are about 50mm between lamps and 250mm overall, dang it, sorry!

[pinnies4me]

Hmm, but these ones look close!! Send me over your address by PM and I'll mail them over.

[studley67]

no probs nick.thanks anyway.ddstoys,I labled all the new white wires with colour coded heatshrink.but i could not buy orange so i substituted green/yellow for orange.where there was light blue and dark i used 1 blue heatshrink for light blue,2 for darkblue.And wrote them in my BOOK.

[ddstoys]

 Man your a legend I've saved some machines but a hacked loom is normally a No for me but after seeing this and kidamigos efforts if one comes up I might save it

[studley67]

thanks HEAPS nick,they will save me a lot of time customising.

[studley67]

I used up the last of my lacing cord today,NEED more.anybody work in the wiring field that has a spare roll-end would be much apreciated.

[studley67]

Man your a legend I've saved some machines but a hacked loom is normally a No for me but after seeing this and kidamigos efforts if one comes up I might save it

laugh,yeah mate stop hanging them on the ceiling.or get them down and send to me.lol